Pegasus AP45 Hi Flow Pump - 45 gpm
Ref: K0/16/01
Pegasus AP45 0.75 Horsepower, 45 GPM High flow pump, Incorporating pneumatic switch. Used extensively on our Pegasus 6, 8 and 10 jet systems.
Our Price :
£137.50 (£161.56 Including VAT at 17.5%)
|
 |
|
 |
Ultrajet Pump - Reconditioned
Ref: B/ULTRAJETPUMP
Very few left. These pumps are reconditioned, not new, and therefore carry only a 6 month guarantee.
Our Price :
£135.00 (£158.63 Including VAT at 17.5%)
|
 |
|
|
Evolux Imperial 0.95 HP pump with Pneumatic switch
Ref: AS/ESUPEV100
This 0.95hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.If you have any doubt about the thread size of your connectors please go to our FAQ page and check.Click here to determine if the pump you need is Imperial or Metric.
Our Price :
£137.50 (£161.56 Including VAT at 17.5%)
|
 |
|
|
Evolux Imperial 0.75HP Switched Pump With Drain
Ref: AS/ESUPEV100/1
This 0.95hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.If you have any doubt about the thread size of your connectors please go to our FAQ page and check.Please note that this pump is prefitted with a crain connection for 10mm OD Nylon tube.Click here to determine if the pump you need is Imperial or Metric.
Our Price :
£142.50 (£167.44 Including VAT at 17.5%)
|
|
|
|
Evolux Imperial 1.2HP Switched Pump With Drain
Ref: AS/ESUPEV150/1
This 1.2 HP pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.If you have any doubt about the thread size of your connectors please go to our FAQ page and check.This pump incorportates a 10mm OD drain fitting for Nylon Tube. This drain will normally connect to a special draining waste as supplied with Pegasus Whirlpool Baths.Click here to determine if the pump you need is Imperial or Metric.
Our Price :
£152.50 (£179.19 Including VAT at 17.5%)
|
|
|
|
Evolux Imperial 1.5 HP Imperial Pump (unswitched)
Ref: AS/ESUPEV200
This 1.5 Hp pump with Imperial Fittings is the most popular type of pump used on whirlpool systems for the last twenty years.If you have any doubt about the thread size of your connectors please go to our FAQ page and check.Click here to determine if the pump you need is Imperial or Metric.
Our Price :
£186.00 (£218.55 Including VAT at 17.5%)
|
|
|
|
0.75HP Pump 32mm Discharge 50mm Suction
Ref: S/075HP/32-50/SW
Compact 0.75HP replacement pump suitable for whirlpool systems with metric fittings 32mm discharge to jets and 50mm connection from suction pipe. Pre-fitted with pneumatically operated airswitch. Conforms to all relevant European standards IP55, TUV, kEMA, CENELECClick here to determine if the pump you need is Imperial or Metric.
Our Price :
£133.33 (£156.66 Including VAT at 17.5%)
|
 |
|
|
0.75HP pump 50mm discharge-50mm suction
Ref: S/075HP/50-50/SW
Compact 0.75HP replacement pump suitable for whirlpool systems with metric fittings 50mm discharge to jets and 50mm connection from suction pipe. Pre-fitted with pneumatically operated airswitch. Conforms to all relevant European standards IP55, TUV, kEMA, CENELECClick here to determine if the pump you need is Imperial or Metric.
Our Price :
£138.00 (£162.15 Including VAT at 17.5%)
|
 |
|
|
|
|
