| |
| A.
|
Disconnect the
electrical power supply |
| B.
|
Turn off the
water feed to the WC cistern.
Bail out as much water
as possible from the cistern. |
| C. |
Disconnect the
Discharge Pipe |
| D.
|
Disconnect the
inlet connections |
| E.
|
Ease the
flexible connector of the WC pan spigot
and slide
the Sanipack out from behind the
panel. |
Note: To ease replacement
of the lid onto the Sanipack case, lubricate the rubber seal
with liquid soap before replacing.
Do not re-connect the
electrical supply until the re-installation of the unit is
complete
| 
